LS Industrial Systems SV-iE5 Series User Manual

Chapter 5. Loader
5-8
 Parameter change in PG Group
Changing P34, Code 34 of PG Group from 0 to 1
PG group
FUNC
FUNC
SHFT
X4
FUNC
SHFT
X3
FUNC
1
-. The 1st code of PG Group is displayed.
-. Press FUNC key.
2
-. SET lamp lights up.
-. Can move to Code 1.
-. Chang it to 4 by using UP() key.
3
-. The first digit is changed to 4
-. Press SHFT key.
4
-. 0 in 04 is active.
-. Increase up to 3 by using UP() key.
5
-. Can move to Code 34.
-. Press FUNC key.
6
-. SET lamp is out.
-. It means the current position is Code 34 of PG Group.
-. Press FUNC key.
7
-. SET lamp light up.
-. Code 34 is set to 0.
-. Increase it to 1 by using UP() key.
8
-. Press FUNC key.
-. Press FUNC key once more when 1 blinks.
-. SET lamp is out.
9
-. Function code change is complete.
-. Press SHFT key.
10 -. Moved to Code 1 of PG Group.

LS Industrial Systems SV-iE5 Series Specifications

General

Brand	LS Industrial Systems
Model	SV-iE5 Series
Category	Inverter
Language	English