LS Industrial Systems SV-iE5 Series - How to Move Among Codes in a Group

Chapter 5. Loader
5-4
5.4 How to move among codes in a group
 Moving between groups
Moving from 15 of PG Group to Drive Group
1
-. Display Code 15 of PG Group.
-. Press SHFT key.
2
-. It displays F0, the first code of PG Group.
-. Press SHFT key.
3 -. It displays 0.00, the first code of Drive Group.
 Code change in Drive Group
Drive group
1
-. It displays 0.00, the 1st code
of Drive Group.
-. Press UP() key.
2
-
. It displays ACC, the 2nd
code of Drive Group.
-. Press UP() key.
3
-. It displays dEC, the 3rd code
of Drive Group.
-. Keep pressing UP() key.
4
-. It displays drC, the final code
of Drive Group
-. Press UP() key in the final
code of Drive Group.
5
-. It returns to the 1st code of
Drive Group.
Note
For moving reversely, use DOWN() key.
PG groupDrive group
SHFT