Why is the cylinder movement slow and erratic with noisy operation on my LS tractor LB1300?
- RRita ClarkNov 22, 2025
If the cylinders on your LS tractor Farm Equipment are moving slowly or erratically, and making noise, here are some possible causes and solutions: * The hydraulic fluid level might be low. Check and replenish the hydraulic fluid. * The hydraulic fluid could be cold. Allow the hydraulic system to warm up. * The engine RPM might be too slow. Increase engine speed for better backhoe operation. * There might be excessive weight in the bucket. Reduce the material load. * The control valve linkage could be binding or defective. Check and repair the linkage if needed. * There could be aeration of the hydraulic fluid. Refer to 'Aeration of hydraulic fluid'. * A quick disconnect coupler might be restricted. Check the coupler connections and repair or replace if necessary. * A hydr...

