To Next Page

To Previous Page

TECHNICAL STANDARDS APPLIED

The standards applied in order to comply with the essential requirements of the Directives

2006/95/CE "Electrical material intended to be used with certain limits of voltage" and 2004/108/CE

"Electromagnetic Compatibility" are the following ones:

• EN 50178 (1997) “Electronic equipment for use in power installations”.

•EN 61800-3 (2004) “Adjustable speed electrical power drive systems. Part 3: EMC

product standard including specific methods”

• EN 55011/A2 (2003) “Industrial, scientific and medical (ISM) radio-frequency

equipment. Radio disturbances characteristics. Limits and

methods of measurement”

•EN61000-4-2/A2 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and

measurement techniques. Section 2: Electrostatic discharge

immunity test.

•EN61000-4-3/A2 (2004) “Electromagnetic compatibility (EMC). Part 4: Testing and

measurement techniques. Section 3: Radiated, radiofrequency,

electromagnetic field immunity test.

•EN61000-4-4/A2 (2002) “Electromagnetic compatibility (EMC). Part 4: Testing and

measurement techniques. Section 4: Electrical fast transients /

burst immunity test.

•EN61000-4-5/A1 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and

measurement techniques. Section 5: Surge immunity test.

•EN61000-4-6/A1 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and

measurement techniques. Section 6: Immunity to conducted

disturbances, induced by radio-frequency fields.

•CEI/TR 61000-2-1 (1990) “Electromagnetic compatibility (EMC). Part 2: Environment.

Environment description for low-frequency conducted

disturbances and signalling in public low voltages supply

systems”

• EN 61000-2-2 (2003) “Electromagnetic compatibility (EMC). Part 2: Environment.

Compatibility level for low-frequency conducted disturbances and

signalling in public low voltages supply systems”

• EN 61000-2-4 (1997) “Electromagnetic compatibility (EMC). Part 2: Environment.

Compatibility level in industrial plants for low-frequency

conducted disturbances”

•EN60146-1-1/A1 (1998) “Semiconductor convertors. General requirments and line

commutated convertors. Part 1-1: Specifications of basic

requirements”

LSIS SV-iG5A Series User Manual

Questions and Answers: