Appendix 1 Flag List
App. 1-1
Appendix 1 Flag List
Appendix 1.1 Special Relay (F) List
(1) “S(U)” type
Indicates PLC mode and operation State.
Editing program download during RUN.
Internal edit processing during RUN.
Edit is ended during RUN.
Operation mode changed by key.
Operation mode changed by local PADT.
Operation mode changed by Remote PADT.
Operation mode changed by Remote
communication module.
Initialization task on execution.
Reports heavy error state of system.
Module Type does not match.
Special/communication module interface error.
Detected heavy error in external
Device.