LSIS XBF-AH04A

XGB Analog edition manual
Ex.2) In case thermocouple input module is mounted at slot 1. (In case of IEC)
(c) In case setting error occurs, setting error representation flag (U0x.01.8~ U0x.01.B, in case of IEC
type %UX0.x.24 ~ %UX0.x.27) will be on and it will act as default value. If setting error representation
flag (U0x.01.8~ U0x.01.B, in case of IEC type, %UX0.x.24 ~ %UX0.x.27) is on, check above setting
error information 1B
H
~ 1F
H
(address 27~30) area, check related memory address 01
H
~ 1A
H
(address
1~26) and cancel error.
r
5 - 60