LSIS XBF-AH04A - Page 75

Chapter 2 Analog Input Module (XBF-AD04A)
2 - 41
2.14.2 RUN LED is off
RUN LED is off .
A/D conversion module is installed on the base
correctly?
Correctly install A/D conversion module on the base.
.
Contact the nearest agency or A/S center.
I/O information can be seen at the XG5000.
Normally operated if A/D conversion module with
error is changed to another module
No
Yes
No
Yes
Yes
Contact the nearest agency or A/S center.