To Next PageTo Next Page
Need help?Do you have a question about the Lubing LC-2 and is the answer not in the manual?
Details the LUBING Top-Climate-System's design for cooling, humidifying, and cleaning air.
Explains symbols and formatting used for warnings and important information.
Outlines obligations and exclusions for warranty and liability claims.
States the manual is for internal use and protected by copyright.
Refers to general terms and conditions for guarantee details.
Provides essential guidelines for safe system operation and handling.
Lists checks and familiarization required before initial system startup.
Details daily inspection activities for safe system operation.
Specifies the system's designed purpose and warns against misuse.
Details dangers and precautions related to electrical hazards.
Addresses hazards from hydraulics, pneumatics, and incorrect spare parts.
Lists required personal protective equipment for all system work.
Emphasizes the importance and proper use of safety devices and guards.
Outlines the legal and operational responsibilities of the plant operator.
Defines qualifications and roles for personnel involved with the system.
Mandates regular instruction for personnel and record-keeping.
Provides general guidelines for safely transporting system components.
Details proper storage conditions for system components before installation.
Guides the installation process for the main pump unit.
Explains how to install the water supply and filter unit.
Provides instructions for installing optional system modules.
Details the installation procedure for the LUBING Touch Controller.
Explains how to connect external climate computers and sensors.
Describes the CAN bus connection for controller expansion.
Guides the installation of pipes for connecting components and nozzles.
Provides recommendations for positioning and orienting nozzle lines.
Details the use of cutting ring fittings for pipe connections.
Explains the installation procedure using PressFix fittings.
Covers the process of wall mounting pipes and nozzle lines.
Describes suspending nozzle lines using a tension wire.
Explains suspending nozzle lines with support pipes for height adjustment.
Guides the final step of installing the nozzles into the system.
Details the installation of the FlexClamp system for flexible nozzle positioning.
Explains the installation of section valves for Vario systems.
Covers the final steps after assembly, prior to operation.
Provides instructions for the initial startup of the system.
Guides on temporary shutdown, draining, and restarting the system.
Specifies recommended water quality limits for optimal system performance.
Discusses the possibility and considerations for system disinfection.
Details the correct operation of the pump system and its components.
Describes additional components relevant to the pump system.
Explains the operation and features of the LUBING Touch Controller.
Introduces the function keys and standard screen layouts.
Provides an overview of the controller's menu structure and options.
Guides on initial setup and language selection for the controller.
Details how to adjust various system parameters and settings.
Illustrates how sensor values affect the spraying ratio in LCS controllers.
Describes special functions like Box wetting and System flushing.
Lists and explains various system parameters that can be configured.
Guides on updating the controller's software version for new features.
Stresses the importance of using only original spare parts.
Provides maintenance guidelines for the piston pump unit.
Details the maintenance procedures for the filter unit.
Lists common faults with the Touch Controller and their causes/remedies.
Addresses faults related to the pump system's pressure and operation.
Details troubleshooting for Vario pump models.
Covers faults related to belt-drive pumps.
Troubleshoots problems with high-pressure valves and pressure relief.
Provides the wiring diagram for the LC-1 Touch Controller.
Shows the wiring diagram for the LCS-1 Touch Controller.
Presents the wiring diagram for the LC-2 Touch Controller.
Displays the wiring diagram for the LCS-2 Touch Controller.
Offers the wiring diagram for the LCM Touch Controller.
Details the wiring diagram for the LCM Vario Touch Controller.
Shows wiring for extension boxes used with controllers.
Illustrates the connection scheme for Vario systems.
Wiring diagram for pump connection with LC-1 controller.
Wiring diagrams for pumps with special voltage requirements.
Wiring diagram for Vario pumps with LCM vario controller.
Provides dimensional data for the D-Line pump unit.
Provides dimensional data for the R-Line pump unit.
Shows the relationship between nozzle count and required flow rate.
Lists electrical and environmental data for the Touch Controller.
General| Brand | Lubing |
|---|---|
| Model | LC-2 |
| Category | Water System |
| Language | English |
