LulzBot TAZ Workhorse - Page 18

Cura LulzBot Edition
Standard
Designed to give a balanced resolution by increasing the layer height
and print speeds. This will make the organic curves slightly more
step-like than the ne setting, but it will reduce printing time.
High Speed
Designed for fast prints where the overall model nish is not the
primary concern. Most commonly used for quick iteration of designs
when rapid prototyping.
Different Filament Manufacturers
Dierent lament manufacturers have dierent formulations for their spe-
cic brand. These dierent formulations may have dierent ideal settings.
We highly recommend using the lament brands listed in Cura LulzBot
Edition. Beautiful 3D printed objects start with reliable and consistent
lament. The proles included within Cura LulzBot Edition will be good
starting points for other manufacturers; but they may require changes to
various settings for ideal results.
Infill Selection
Inll represents how solid the inside of your object will be printed. Easily
adjust inll by using the slider to drag the circle to your desired inll. 20%
is a good starting point for most objects.
Printing Support Material
The support option will build up material underneath the portion extending
in mid air, preventing gravity from making it droop. LulzBot 3D Printers
are able to print models that have angles and overhangs, even without
support material. This will depend on the overhang distance and angle
of your particular model le, but a good rule of thumb is greater than 50
degree overhangs will require support. Turn this option on if sections of
your model are extending in mid air. Where support is placed and at what
angle, can be adjusted in advanced settings support.
18