Cura LulzBot Edition
Setting Visibility
When rst switching to custom settings, some options will be hidden by
default. To select which options are available, go to Settings > Congure
Setting Visibility You can now select which settings you would like available
and which ones you would like hidden. This can be helpful for new users, or
when teaching others the basics of 3D printing. In order to view all settings,
select the checkbox in the top left near “check all.” For the remainder of
this manual, we will assume every option is visible.
2.8 Quality Tab Settings
This section will allow you to modify and adjust multiple settings that are
dependent upon nozzle shape and diameter for specic parts of your print.
Layer Height
The thickness of each printed layer is known as the “Layer Height”. The
smaller the layer height, the smoother curves will appear. Smaller layer
heights will also increase print time, as it will take more layers to complete
the object.
When you have dierent layer heights between extruder 1 and extruder
2, the dierence will be averaged. This is required as when printing each
nozzle needs to print at the same height to avoid collisions with your object.
36
To Next Page
Loading...
