Cura LulzBot Edition
Union Overlapping Volumes
Union overlapping volumes will attempt to combine overlapping meshes
internally within your object. This can cause intentional internal cavities
to disappear.
Remove All Holes
Remove all holes will ignore all internal geometry of your model, and only
focus on the outside shape of the model.
Extensive Stitching
Extensive stitching will close any external holes of the mesh by connecting
them with the nearest polygon. This can require a lot of additional
processing time.
Keep Disconnected Faces
This setting will prevent Cura from attempting to x any issues with your
model. This should just be used as a last resort when unable to generate
gcode, and still at that point may not produce ideal results.
Merged Meshes Overlap
Merged meshes overlap will slightly overlap two models during dual extru-
sion to ensure good adhesion between the parts. Too large of a setting here
can lead to color bleed on dual parts.
Remove Mesh Intersection
Remove mesh intersection will cause Cura to remove areas where multiple
models overlap during dual extrusion.
Alternate Mesh Removal
Alternate mesh removal will alternate which model in the overlapping
section is being ignored. The eect is an interwoven intersection between
the two models.
66
To Next Page
Loading...
