Lumel ND30 User Manual

ND30-09D 3 User's manual
4. plug with 16 screw terminals 1 pc
5. plug with 14 screw terminals 1 pc
6. user's manual 1 pc
Fig. 1. Meter set
3 BASIC REQUIREMENTS, OPERATIONAL SAFETY
In terms of operational safety the controller meets the requirements of the
EN 61010-1 standard.
Remarks concerning safety:
 The meter should be installed and connected only by a qualified
personnel. All relevant safety measures should be observed during
installation.
 Always check the connections before turning the meter on.
 Prior to taking the meter housing off, always turn the supply off and
disconnect the measuring circuits.

Lumel ND30 Specifications

General

Brand	Lumel
Model	ND30
Category	Measuring Instruments
Language	English