ND30-09D 47 User's manual
Calling the IP address of the meeter in a browser, e.g. http://192.168.1.30
will display a start website to enter a user name and a password.
Fig. 30. View of the meter's web server login window
Web server user name can not be changed. You can change the password
for each user - for safety reasons it is recommended to change the
passwords. Changing the password is possible only through a web page in
the "Ethernet" parameter group. The passwords can be up to 8 characters.
If the password is lost (what disables using the web server), restore the
default settings of the Ethernet interface e.g. from the menu: Settings →
Default settings → Yes or entering the value "1" to the register 4152. All
standard meter parameters and Ethernet interface parameters (see Table 9)
and the passwords of the web server users will be restored:
user "admin” → password: "admin”;
user "user” → password "pass”.
10.3.3 FTP Server
The FTP file sharing protocol has been implemented in the ND30
meters. The meter acts as a server, allowing the users to access the
internal memory of its file system. Access to the files is possible using a
computer, a tablet with installed FTP client or other device acting as a FTP
client. The standard FTP ports are used for transferring files, "1025" - data
port and "21" -- commands port. A user can change the port used by the
FTP protocol if necessary. Please note, that the port configuration of the
FTP server and the client must be the same.
The FTP client program can work in a passive mode. The connection is fully
made by the FTP client in the passive mode (a client chooses the data port).
It is possible to use up to one connection at the same time for the file
To Next Page
Loading...
Need help?
General
