ND30-09D 48 User's manual
transfer with the meter, so you should limit the maximum number of a FTP
client connections to 1.
10.3.3.1 FTP user selection
The meter has two user accounts for the FTP server protected by the
individual passwords:
• user: "admin”, password: "admin” - access to read and write the files
• user: "user”, password: "passftp” - access to read only the archive
files.
The FTP user names can not be changed but you can change the
password for each user - for safety reasons it is recommended to change
the passwords. Changing the password is possible only through a web page
in the "Ethernet" parameter group. The passwords can be up to 8
characters. If the password is lost (what disables using the FTP server),
restore the default settings of the Ethernet interface e.g. from the menu:
Settings → Default settings → Yes or entering the value "1" to the register
4152. All standard meter parameters and Ethernet interface parameters
(see Table 9) and the passwords of the FTP server users will be restored:
user "admin” → password: "admin”;
user "user” → password "passftp”.
The program FileZilla could be an example of the FTP client. You can
view and download the archive files by entering the IP address of the meter
in the address field.
To Next Page
Loading...
Need help?
General
