Lumel ND30 - Display Mode

ND30-09D 25 User's manual
6 High limit
output
0.01 .. 24.00 Upper value of the output range
in mA
20.00
7 Out mode Normal
Low limit output
High limit output
Continuous output working mode Normal
7.5 Display mode
In this mode, you can configure the pages displayed in a normal work mode
of the meter Measurement
Fig. 19. Screens of Display mode
Table 4
Item Parameter name Range Notes/description Default
settings
1
Settings
Backlight level Minimum, Medium,
Maximum
Maximum
Time to Backlight
level min
0 .. 9999 in seconds 0
Pages cfg Page 1
Page 2
:
Page 11
Page 12
Selection of pages
visualized in
Measurement mode
Page 1
Page 2
:
Page 11
Page 12
The buttons
and Select
and Select
The buttons
The buttons
and Select