Lumel ND30 User Manual

ND30-09D 58 User's manual
4142 RW
20…
65535
FTP server commands port number 21
4143 RW
20…
65535
FTP server data port number 1025
4144 RW 1…4
The maximum simultaneous connections to
Modbus TCP/IP service
1
4145 RW 10…600
Port closing time of Modbus TCP/IP service, in
seconds
60
4146 RW 0…255 Device address for Modbus TCP/IP protocol 1
4147 RW 0…65535 Modbus TCP port number 502
4148 RW
80…
65535
Web server port number 80
4149 RW 0,1
Saving the new parameters and initiate Ethernet
interface
0 – no changes
1 - saving the new parameters and initiate the
Ethernet interface
0
4150 RW 0..2 Menu language: 0-ENG, 1-PL, 2-DE 1
4151 RW 0,1 reserved 0
4152 RW 0.1
Saving default parameters (complete with
resetting energy as well as min, max and mean
power to 0) and Ethernet,
0
4153 RW 0..59 Seconds 0
4154 RW 0…2359 Hour *100 + minutes 0
4155 RW
101…
1231
Month * 100 + day 101
4156 RW
2015…
2077
Year 2015
4157 RW reserved
4158 RW reserved
4159 RW reserved
The alarm switching values stored in the registers 4036, 4037, 4054, 4055, 4067, 4068,
4076, 4077, 4085, 4086 are multiplied by 10, e.g. the value of 100% should be entered
as "1000". The lower and upper values of the input range of the continuous output stored
in the registers 4094, 4095 are multiplied by 10, e.g. the value of 100% should be
entered as "1000". The lower and upper values of the current output range stored in the
registers 4096, 4097 are multiplied by 100, e.g. the value of 20 mA should be entered as
"2000".
Table 17
Register
address
Opera
tions
Range Description Default
4200 RW
7500 ..
7957
Register 1 of programmable group of registers
for readout
7500
4201 RW
7500 ..
7957
Register 2 of programmable group of registers
for readout
7501
4202 RW
7500 ..
7957
Register 3 of programmable group of registers
for readout
7502

Lumel ND30 Specifications

General

Brand	Lumel
Model	ND30
Category	Measuring Instruments
Language	English