Luminator ODK4 User Manual

ODK4 QUICK REFERENCE GUIDE
Luminator Technology Group
12
SECTION 5
CONFIGURE EMERGENCY MESSAGE
5.1 Access Emergency Message Options
5.1.1 Configure Emergency Message Options (Auto-Off/Enable-Input)
Emergency Mode – Configures the method for cancelling the Emergency Mode.
To access the Configuration Menu see Figures 4-1 through 4-4.
From the Configuration Menu (see Fig. 4-4) press MISC to access the Miscellaneous
Settings Menu.
Figure 5-1. Miscellaneous Settings Figure 5-2. Emergency Options Menu
From the Miscellaneous Settings Menu (see Fig. 5-1) press EMERG Key to access the
Emergency Options Menu (see Fig. 5-2).
5.1.2 Configure Emergency Message Options - Auto-Off
From the Emergency Options Menu (see Fig. 5-2) press the MODE Key to access the
Emergency Mode Setting screen (see Fig. 5-3).
Figure 5-3. Emerg. Mode Setting
From the Emergency Mode Setting screen (see Fig. 5-3) press ENBL (factory default) or
DSABL to enable/disable (respectively) the emergency message Auto-Off Mode.
The functions are as follows:
1. Auto-Off Enabled:
• The emergency mode will cancel and return to the previous destination display
when the emergency input signal is removed. Auto-off enabled should only be
used when the emergency input signal is maintained for the duration of the event

Luminator ODK4 Specifications

General

Brand	Luminator
Model	ODK4
Category	Monitor
Language	English