Lust ServoOne - EDS File, Object Directory; EDS File, Object Directory Parameter List

User Manual CANopen/EtherCAT
63
[Chapter 11]
11 EDS File, Object Directory
Parameter List
11.1 EDS file, object directory
An EDS file is available for the devices to integrate them into the CAN master. The file
is shipped with the firmware. It contains all the CAN objects of the drive controllers.
Note: ServoOne has parameters with default values in the device that may
deviate from the default values in the EDS file. These are power-stage specific
parameters with contents that are dependent on the size. Examples of such
parameters are:
Para 302 – CON_SwitchFreq
Para 307 – CON_VoltageSupply
Para 651 – DV_CAL_VDC