Lytro Illum - Setting the EV Compensation

To Next Page

To Previous Page

Setting the EV compensation

Exposure value compensation is available in all exposure modes except Manual Mode. Set the EV compensation by tapping the EV

compensation indicator in the information bar at the bottom of the screen. A selection band will open across the middle of the screen,

with the current setting at the center. The available settings range from -2.0 to +2.0.

Tap the EV compensation indicator to open the selection band.

Main Page

Table of Contents2
Capture Mode, Menu Bar2
Menu Bar2
Playback Mode, Menu Bar2
Introducing the Lytro ILLUM6
- Benefits of the Light Field6
- Learning to Use Lytro ILLUM6
Quick Reference Guide8
- In the Box9
- Product Requirements9
- Touchscreen Capture Mode10
- Image View Area11
  - Information Bar12
- Menu Bar13
- Menu Bar Page14
  - Menu Bar Page15
  - Playback Mode, Menu Bar Page 116
- Playback Mode, Menu Bar17
Getting Started18
- Charging the Battery18
- Inserting the Charged Battery18
- Inserting the Strap Rings18
- Inserting an SD Card19
- Using the Set-Up Assistant19
  - Transferring the Pairing Data19
  - Powering on and off19
Capture Mode20
- Camera Control Behaviors21
- Touchscreen Layout in Capture Mode22
- Capture Mode, Image View Area24
  - Capture Mode, Information Bar26
- Capture Mode, Menu Bar28
- Capture Mode, Menu Bar Page 230
- Additional Touch Control Icons32
  - Tapping the Screen to Focus33
  - Hiding /Displaying the Menu / Information Bar34
- Choosing an Exposure Mode35
- Setting the ISO38
Setting the Shutter Speed40
Setting the EV Compensation42
Setting the White Balance44
Manually Setting the White Balance45
Applying a Grid Overlay48
Shooting with Continuous Shutter48
- Using the Self Timer48
Using the Live Exposure Histogram50
- Adjusting the Optical Offset51
Adjusting the Settings Menu51
Opening the Rearrange Menu52
- Rearrange Menu Features53
Using Lights-Out53
- Using Manual Focus53
- Applying Focus Bracketing54
Applying Exposure Bracketing56
- Using Focus Lock58
Using Zoom Lock58
- Using Hyperfocal Mode58
- Using a Flash59
Using the Level Gauge60
Calibrating the Level Gauge61
Playback Mode62
- Touchscreen Layout in Playback Mode63
  - Information Bar64
- Menu Bar64
- Depth Assist Bar64
  - Processing a Living Picture for Refocusing65
  - Refocusing a Living Picture66
- Virtual Aperture in a Living Picture67
  - Interactive Perspective Shift in a Living Picture68
- Using Grid View69
- Using the Review Exposure Histogram70
- Deleting a Picture70
- Deleting One or more Pictures in Grid View70
- Opening the Settings Menu71
Depth Composition Features72
- The Refocusable Range72
- Depth Assist Bar75
- Depth Histogram and Depth Overlay81
  - Focus Bracketing83
Settings84
- Format SD Card84
- Brightness84
- Sounds84
- Exposure Simulation84
- Clipping Warning85
- Instant Preview85
  - File Format85
- Ios Connect85
- Long Exposure Noise Reduction85
- Camera Controls86
  - Shutter Half-Press86
- Exposure Dials86
- Exposure Dial Assignments86
- Lens Rings87
- Rearrange Menu87
- Remap Buttons87
- Ael87
- General87
- Date & Time87
- Time Zone88
- Language88
- Distance Measurements88
- About88
  - Update Firmware88
  - Transfer Pairing Data to SD Card88
- Help89
- Reset89
Icon Glossary90
Legal94
Resources94

Lytro Illum - Setting the EV Compensation

Table of Contents

Other manuals for Lytro Illum