84
Settings
You can open the Settings menu from either Capture or Playback Mode by tapping the Settings icon in the Menu Bar. The Set-
tings menu will ll the screen, replacing whatever was displayed. Swipe the touchscreen to scroll up or down through the menu.
To close the Settings menu, tap CAPTURE at the top left of the screen, or press the shutter button halfway. The camera will always
return to Capture Mode when exiting Settings. To return to Playback Mode, tap the Playback Mode icon in the Menu Bar again,
press the Fn button, or swipe the screen from left to right.
Format SD card
For best performance, format your SD card in the Lytro ILLUM after transferring the Pairing data to the Lytro Desktop, and again
after using it in any other device. Please note that formatting the card will erase any data stored on it. To begin, tap FORMAT SD
CARD in the Settings menu. A window will open with two options: FORMAT or CANCEL. To continue with formatting, tap FOR-
MAT. When formatting is complete, tap DONE to return to the Settings menu.
Brightness
Adjust the brightness of the screen by tapping BRIGHTNESS in the Settings menu and dragging the slider. Or slide the AU-
TO-BRIGHTNESS selector to the ON position, and the camera will automatically adjust the brightness to the lighting conditions.
Sounds
Tap SOUNDS in the Settings menu, and by dragging the slider, adjust the volume of the sounds produced by the camera. Turn off
either all sounds or just the touch sounds by sliding the appropriate selector to the OFF position.
Exposure simulation
The live view can be set to simulate the exposure that will result if a Living Picture is captured using the current settings. To acti-
vate exposure simulation, open the Settings menu, look for EXPOSURE SIMULATION, and slide the selector to the AUTO position.
To Next Page
Loading...
Need help?
General
Weight and Dimensions