88
Time Zone
Tap to display a list of locations and their respective time zones. Swipe up to scroll to additional locations/zones. Tap to make a
selection.
Language
Tap to display the options for the language used by the camera. Tap to make a selection.
Distance Measurements
To change the unit of measurement used by the camera, slide this selector from feet to meters or vice versa.
About
Tap to display information about the camera. This information includes the Firmware version currently installed on the camera.
Update Firmware
Tap to update the camera rmware, which takes several minutes. A window will open with two options: CANCEL or UPDATE. To
continue with the update, tap UPDATE.
Transfer Pairing Data to SD Card
Tap to transfer the camera Pairing data to the SD card, which may take a few minutes. A window will appear with two options:
CANCEL or TRANSFER To continue with the transfer, tap TRANSFER.
The Pairing data is required by the Lytro Desktop to optimally process pictures, and will be automatically copied off of the SD
card by the Lytro Desktop the rst time pictures are imported from that card. The Pairing data requires approximately 2GB of free
space on the SD card.