Mackie ProFX6v3+ - 1;4 Stereo Line Input Jacks

PROFXV3+ MULTI-CHANNEL ANALOG MIXERS WITH ENHANCED FX, USB RECORDING MODES, AND BLUETOOTH®
3
/4" Stereo Line Input Jacks
The stereo line inputs are designed for /4" TRS balanced or /4" TS unbalanced signals.
They may accept any line-level instrument, eects device, CD player, etc.
If you are connecting a mono source, use the lef (mono) input, and the mono signals will appear on both sides of the main mix.
To connect balanced lines to these inputs, use a /4" Tip-Ring-Sleeve (TRS) plug. To connect unbalanced lines
to these inputs, use a /4" mono (TS) phone plug. The wiring diagrams were presented two pages ago.
NEVER connect the output of an amplifier directly to a ProFXv3+ mixer’s input jack.
This could damage the input circuitry and we wouldn’t want that now, would we?
As seen in the pictures above, the ProFX6v3+ has one pair of 1/4" stereo line input jacks (on channels 3/4),
the ProFX10v3+ has two pairs of 1/4" stereo line input jacks (on channels 5/6 and 7/8), and the ProFX12v3+
has three pairs of 1/4" stereo line input jacks (on channels 5/6, 7/8 and 9/10).
ProFX10v3+ProFX6v3+ ProFX12v3+