Mackie ProFX6v3+ - Chorus 1 Parameters and Values; Chorus 2 Parameters and Values

PROFXV3+ MULTI-CHANNEL ANALOG MIXERS WITH ENHANCED FX, USB RECORDING MODES, AND BLUETOOTH®
43
Now a look at the three modulation eects (Chorus , Chorus 2 and Flanger).
Rate – This knob sets the speed of the delay modulation. The range will vary depending on the eect chosen.
Depth – This knob sets the depth of the delay modulation, from  to 0. The range will vary depending on the eect chosen.
Blend – The Blend knob essentially works as a level control in that you determine how much the sound eect dominates the mix.
Chorus  Parameters and Values
Chorus 2 Parameters and Values
EQ
PRESETS
FLANGER
FX
27 44 50
DEPTH BLENDRATE
Parameter Low Value High Value Default Increments
Rate 0 54 2 ±
Depth 6 73 28 ±
Blend 0 00 59 ±
EQ – – – –
Frequency 400 Hz 6.0 kHz .0 kHz Variable
Width (Q) 0.5 3.0 2.0 ±0.
Gain –8 dB +8 dB +0 dB ± dB
LPF 6.0 kHz 8.0 kHz 0.0 kHz ±0.-0.2 kHz
HPF 80 Hz 600 Hz 20 Hz ±-0 Hz
Parameter Low Value High Value Default Increments
Rate 6 93 6 ±
Depth 30 50 36 ±
Blend 0 00 00 ±
EQ – – – –
Frequency 400 Hz 6.0 kHz 3.0 kHz Variable
Width (Q) 0.5 3.0 3.0 ±0.
Gain –8 dB +8 dB –8 dB ± dB
LPF 6.0 kHz 8.0 kHz 8.7 kHz ±0.-0.2 kHz
HPF 80 Hz 600 Hz 334 Hz ±-0 Hz