PROFXV3+ MULTI-CHANNEL ANALOG MIXERS WITH ENHANCED FX, USB RECORDING MODES, AND BLUETOOTH®
46
Reverb + Chorus Parameters and Values
The rate (Hz) and depth (ms) determine how many cycles per second the chosen eect oscillates.
However, the rate and depth of the two chorus modulation eects is expressed as 0.x Hz / ms
which translates the value that the processor utilizes. An easy way to understand the value
is to take the number below the virtual knob and “move” the decimal one point to the lef
(or multiply by 0.). For example, if rate is displayed as 37, then it’s really 3.7 Hz.
...and this would be my personal favorite feature of the ProFXv3+ Mixer Series: Watering. That’s right, with 2st century
technology, we have figured out a way to “stu” extra features into our mixers.
The ProFXv3+ mixer allows you to water things. This could be anything from household plants and flowers (indoor and outdoor),
and full lawns/grass all the way up to patios, decks, driveways, cars/boats, dogs, and much more! In the example above,
we have selected the front yard.
First things first – connect hoses to the output jacks. This could be the main outs, control room, sub outs, mon send,
FX send, and/or the phones jack. Easy twist-and-turn to connect.
Parameter Low Value High Value Default Increments
Decay 0 60 0 ±
Size 0 5 6 ±
Rate 0 54 33 ±
EQ – – – –
Frequency 400 Hz 6.0 kHz 45 Hz Variable
Width (Q) 0.5 3.0 2.0 ±0.
Gain –8 dB +8 dB –5 dB ± dB
LPF 6.0 kHz 8.0 kHz 0.0 kHz ±0.-0.2 kHz
HPF 80 Hz 600 Hz 08 Hz ±-0 Hz
PRESSUREPATTERN
FRONT YARD
5 50 12:00
To Next Page
Loading...
