Setting properties and parameters for a screen (Flash Professional only) 349
To change the ActionScript class of a screen:
1. Select a screen in the Screen Outline pane.
2. Select Window > Properties.
3. In the Property inspector, click the Properties tab.
4. Enter a class name in the Class Name text box. For more information on ActionScript
classes, see Chapter 7, “Classes” in Learning ActionScript 2.0 in Flash.
To change the registration point of a screen:
1. Select a screen in the Screen Outline pane.
2. Select Window > Properties.
3. Click the Properties tab and click a point in the registration grid.
Clicking a registration point automatically selects in on the Properties tab. When this
option is selected, the registration point moves in relation to the screen content, but the
screen itself does not move.
Setting parameters for a screen (Flash Professional
only)
On the Parameters tab of the Property inspector, you can set parameters to control how the
screen appears and behaves during playback. Different parameters are available for slide and
form screens.
The following parameters are available only for slide screens:
■ The parameter autoKeyNav determines whether the slide uses default keyboard handling
to control navigation to the next or previous slide. When
autoKeyNav is set to true,
pressing the Right Arrow key or the Spacebar advances to the next slide, and pressing the
Left Arrow key moves to the previous slide. When
autoKeyNav is set to false, no default
keyboard handling takes place. When
autoKeyNav is set to inherit (the default setting),
the slide inherits its
autoKeyNav setting from its parent. If the slide’s parent is also set to
inherit, the parent’s ancestors are examined until one is found with its autoKeyNav
parameter set to
true or false. If a slide is a root slide, setting autoKeyNav to inherit
yields the same result as setting it to true.
NOTE
This property can be set independently for each slide, and it affects keyboard
handling when that slide has focus.
To Next Page
Loading...