Configuring learning interactions 569
To remove a Drag and Drop object:
1. Select the Drag and Drop instance that you want to remove, and delete it from the Stage.
2. Select the Drag and Drop component (to the left of the Stage in the quiz template), and
then display the Component inspector by opening it from the Property inspector, if
necessary.
3. Remove the deleted object’s instance name from the appropriate column in the
Component inspector.
Configuring a Fill in the Blank interaction
The Fill in the Blank interaction uses a question text field, a user entry text field, a control
button, and a feedback text field.
To set up a Fill in the Blank interaction:
1. If you are not using a quiz template, place the learning interaction on the Stage. If you are
using a quiz template, select the frame on the Interactions layer that contains the Fill in the
Blank interaction (Frame 3, if you have not added or removed keyframes).
2. Break the movie clip apart (Modify > Break Apart), display the Component inspector, and
then type the interaction ID and the question. See “Configuring a Learning Interaction
component” on page 558.
To Next Page
Loading...