10
Control unit MGCplus
Notices on the document
1.3 Target group
1.3.1 Personnel – activities and qualifications
All work on the control unit may only be carried out by technicians and Mag-
netic MHTM™ FlowMotion® service experts with the following qualifications.
Designation Qualification
Technician › Has completed training as a plant mechanic, plant fitter,
assembly mechanic, assembly fitter or has a comparable
technical education.
› Has completed training as an electrical safety expert.
› Has additional knowledge and experience.
› Knows the associated technical terms and regulations.
› Can assess the work assigned to her/him, recognises
possible dangers and take suitable safety measures.
Magnetic MHTM™ FlowMotion® ser-
vice expert
› Meets all requirements of the technician.
› Trained and authorised by Magnetic.
Table 3: Qualification of the personnel – MGCplus control unit
To Next Page
Loading...