Magnetic MGCplus - Parameterising the Control Unit; Changing Menu Language

29
Control unit MGCplus
Parameterising control unit
5 Parameterising control unit
5.1 Changing menu language
The default setting in the MGCplus control unit is the menu language "English".
Change the menu language as follows:
The operational view is displayed.
Mag01021
10
FlowMotion mWing
1
– –
– –
192.168.115.242
Fig. 2: Example "Operational view
1. Press right operating button « ».
2. Access to parameterisation can be password-protected. If password pro-
tection was activated, you are asked to enter a password.
Mag00818
–––
0
Password
Fig. 3: View "Enter password"