23
5. Raise from the winch the parallelo-
gram and the basket “A” Fig. 31, up tho
the rear line of the tunnel “B” (at the
most).
6. Place the box “A” with the bag in front
of the basket, like shows Fig. 32, with
the arrow towards the machine if you
have this at the box.
7. Open the box. Cut the seals and take
off the cover. Cut the vertex of the lo-
wer half to lower them to the ground.
8. Unfold the bag “A” Fig. 33 in all across
the tunnel, without cutting the safety
belts “B” that keeps the folds armed.
A
FIG.31
FIG.32
FIG.33
To Next Page
Loading...