Makita JR3051T Repair Manual

11 / 32
Fig.18
7 Hold Slider [1] in 1R049 so as not to lower.
8 Assemble Driving sleeve [2].
Fig.19
9 While inserting the blade, turn Driving sleeve [1]
counterclockwise until it is fully turned.
Fig.20
10 While holding Driving sleeve [1] to turn it
counterclockwise all the way, turn Connecting
sleeve clockwise with Wrench 22.
11 Push in Driving sleeve [1] where Driving sleeve [1]
and Connecting sleeve fit.
[1]
[1]
[1]
[2]

Makita JR3051T Specifications

General

Power Source	Corded
Amperage	12 A
Strokes Per Minute	0-3, 000 SPM
Tool Weight	7.3 lbs
Voltage	120 V
Tool Length	17-3/4 inches
Max. Cutting Capacity in Wood	10 inches
Max. Cutting Capacity in Steel Pipe	5-1/8 inches