2-25
21 - PENDULAR ARM RAISING AND LOWERING AND TURRET ROTATION CONTROL 2-34
22 - ARM RAISING AND LOWERING, TELESCOPE EXTENSION AND RETRACTION CONTROL 2-34
23 - PLATFORM FORWARD/REVERSE MOVEMENT CONTROL LEVER 2-35
24 - PRE-HEATING LED 2-35
25 - TURRET ORIENTATION OVER 90° LED 2-35
26 - DIFFERENTIAL LOCKING CONTROL BUTTON 2-36
27 - BUZZER CONTROL BUTTON 2-36
28 - LOW FUEL INDICATOR 2-36
29 - MACHINE FAULT LED 2-36
30 - “OVERLOAD” LED 2-37
31 -240 KG LOAD AND ZONE LED (EXCEPT 260 TJ) 2-37
32 A - “TILT” LED 2-37
32 B - USE WHILE UNDER TILT 2-37
33 - EMERGENCY PUMP 2-37
34 - STARTING CONTROL 2-38
35 - STEERING SELECTION MODE AND AXLE ALIGNMENT LED 2-38
36 - X-Y CONTROL FUNCTION 2-38
37 - PENDULAR UNIT ZERO FUNCTION LED 2-39
38 - PENDULAR UNIT ZERO POSITION CONTROL 2-39
39 - BASKET TILT (EXCEPT 260 TJ) 2-39
40 - GENERATOR OPTION 2-39
41 - EMERGENCY STOP 2-40
42 - TRANSLATION SPEED SELECTION CONTACTOR 2-40
43 - BASKET ROTATION 2-40
44 - PENDULAR UNIT TELESCOPE EXTENSION AND RETRACTION (EXCEPT 260 TJ) 2-40
45 - “DEAD MAN’S” PEDAL 2-41
46 - BUZZER 2-41
47 - SAFETY HARNESS ATTACHMENT POINTS 2-41
48 - SAFETY RAIL 2-41
To Next Page
Loading...
