2-44
USING THE LIFTING PLATFORM
BEFORE STARTING THE LIFTING PLATFORM
- Check the following levels:
• Engine oil.
• Oil in the hydraulic reservoir.
• Coolant.
STARTING THE LIFTING PLATFORM
- Turn the ignition key 1 to notch 2 to make the electrical contact (Fig. B).
- Press button 2 to start up the IC engine (Fig. B).
Do not operate the starter for more than 30 seconds and run a pre-heating cycle between all failed attempts to start.
- Release the button as soon as the engine starts and let the engine run at tickover speed
Never try to push or pull the lifting platform to start it. Such an action would cause severe damage to the transmission.
TRANSPORT POSITION
FORWARD
TRANSLATION
REVERSE
TRANSLATION
C
14
2
1
Notch 2
B
A
!
To Next Page
Loading...
Need help?
General
