PREVENTATIVE MAINTENANCE 5540F/YB5515 SERVICE MANUAL
5-34 Published 10-21-2010, Control# 198-04
• Frame application areas are; hose ends and fittings, all
unpainted fasteners and hardware, all bare metal
surfaces, outrigger pads, and back up alarm hardware.
• Superstructure applications are; hose end and fittings,
wire rope on hoist roller tensioning springs on hoists, all
unpainted fasteners and hardware, valves, slew ring
fasteners and all bare metal surfaces.
• Boom applications areas are; pivot pins, hose end and
fittings, jib pins and shafts, all bare metal surfaces,
headache ball pins/ hook block pins and fasteners.
• All hardware, clips, pins, hose connections not painted
will have treatment applied.
7650-64
1
3
10
12
6
2
6
3
7
11
4
8
9
5
13
12
14
Reference Only
To Next Page
Loading...
Need help?
General
