TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 1 15/10/08 Thomson Power Systems
3.5. GHC DISPLAY MAIN MENU PAGE DESCRIPTIONS
The GHC software provides the TSC 900 control and monitoring information which is visible
on the GHC Display or remote PC. All screen page navigation is controlled by a touchscreen
display using a “finger swipe” motion and/or button press actions. The GHC has pre-
programmed display pages which are selected manually using the touchscreen display. The
display pages are organized into the following main menu pages in software:
To Next Page
Loading...