TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 1 15/10/08 Thomson Power Systems
3.6. GHC DISPLAY SYSTEM SUBMENU PAGE DESCRIPTIONS
The system page is utilized for viewing and/or programming site specific settings based on the
application. Different sub-menu pages are available as shown below. Each System sub-menu
pages can be viewed by selecting the specific button. Refer to Section 5 for programming
description of each submenu. Note: To exit any submenu, press the red x icon.
3.6.1. IMPORT/EXPORT DATABASE
The import/back-up database page is utilized for importing either new program settings
or updated firmware. Current controller settings can also be backed-up or restored
from the GHC SD memory card. Refer to the Programming section of this manual for
further details on import/back-up operating procedures.
3.6.2. TIME/DATE SETUP
The time/date setup page is utilized for changing the TSC 900 real time clock settings
to match the installed location. Refer to the Section 5.4 for further details on time/date
change procedures.
To Next Page
Loading...