TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 1 15/10/08 Thomson Power Systems
TABLE OF CONTENTS
1. INTRODUCTION 1
1.1. PRODUCT REVISION HISTORY 1
1.2. GENERAL DESCRIPTION 1
2. INSTALLATION 2
2.1. GENERAL INFORMATION 2
2.2. NOTES TO INSTALLER 3
2.3. AC VOLTAGE SENSING INPUT 4
2.4. AC CURRENT SENSING INPUT 4
2.5. AC CONTROL POWER INPUT 5
2.6. AUXILIARY DC CONTROL POWER INPUT 5
2.7. PROGRAMMABLE INPUTS 5
2.8. OUTPUTS 5
2.9. EXTERNAL ATS CONTROL WIRING 5
2.10. REMOTE START CONTACT FIELD WIRING 6
2.11. COMMUNICATION CABLE INSTALLATION 6
2.12. DIELECTRIC TESTING 7
3. DESCRIPTION 8
3.1. GRAPHICAL HMI CONTROLLER (GHC) DISPLAY HARDWARE 9
3.2. SWITCH CONTROL UNIT (SCU) HARDWARE 10
3.3. ATS OPERATION MODE DESCRIPTIONS 12
3.4. AUTOMATIC SEQUENCE OF OPERATION 14
3.4.1. OPEN TRANSITION TRANSFER 14
3.4.2. CLOSED TRANSITION TRANSFER 15
3.4.3. AUTOMATIC LOAD SHED OPERATION 17
3.4.4. TEST MODE 18
3.4.5. ABNORMAL SEQUENCE OF OPERATION 19
3.5. GHC DISPLAY MAIN MENU PAGE DESCRIPTIONS 20
3.5.1. HOME PAGE 21
3.5.2. UTILITY METERING PAGE 22
3.5.3. GENERATOR METERING PAGE 22
To Next Page
Loading...
Need help?
General