TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 1 15/10/08 Thomson Power Systems
3.5.4. LOAD METERING PAGE 23
3.5.5. ALARMS PAGE 24
3.5.6. ALARMS LOG PAGE 25
3.5.7. EVENTS LOG PAGE 25
3.5.8. SYNC PAGE 26
3.5.9. SCHEDULER PAGE 27
3.5.10. SETTINGS PAGE 27
3.5.11. SYSTEM PAGE 28
3.6. GHC DISPLAY SYSTEM SUBMENU PAGE DESCRIPTIONS 29
3.6.1. IMPORT/EXPORT DATABASE 29
3.6.2. TIME/DATE SETUP 29
3.6.3. MANAGE USERS 30
3.6.4. SYSTEM INFORMATION 30
3.6.5. INPUT MAPPING 31
3.6.6. OUTPUT MAPPING 31
3.6.7. LOGS 32
3.6.8. COM STATUS 32
4. OPERATING INSTRUCTIONS 33
4.1. GHC SCREEN PAGE NAVIGATION 33
4.2. ON LOAD TEST INSTRUCTIONS (UTILITY POWER FAIL SIMULATION) 34
4.3. OFF LOAD TEST INSTRUCTIONS (GENERATOR NO LOAD TEST) 35
4.4. TIMED TEST INSTRUCTION 36
4.5. OPEN/CLOSED TRANSITION TRANSFER OPERATION 37
4.5.1. OPEN TRANSITION IN-SYNC TRANSFER OPERATION (MODEL X) 38
4.5.2. CLOSED TRANSITION OPERATION (MODEL 3 & 4) 38
4.6. TRANSFER FAIL ALARM RESET 39
4.7. TIMER BYPASS 40
4.8. MANUAL UTILITY RETRANSFER CONTROL 41
4.9. SERVICE DISCONNECT MODE 41
4.10. PHASE UNBALANCE PROTECTION ALARM RESET 42
4.11. TRANSFER HALTED ALARM RESET 43
5. PROGRAMMING INSTRUCTIONS 44
5.1. PASSWORD SECURITY DESCRIPTION (USERS ADMIN) 44
5.2. USER LOGIN PROCEDURE 45
To Next Page
Loading...
Need help?
General