Martin Tornado - Design and Part Identification

© Martin Engineering GmbH 15 M3727UK-09/15
Description of the product
3.4 Design of the air cannon tank
The air cannon tank is manufactured in accordance with
EC Directive 2009/105/EC. The air cannon tank is painted on the
inside (RAL 3009) and powder coated on the outside (RAL2004) to
protect against corrosion.
Any technical change to the air cannon tank or to any pressurised
parts invalidates the CE label and operation and usage in terms of
the EU Machinery Directive (2006/42/EG) is no longer permitted.
3.5 Manufacturer number of the air cannon tank
The Manufacturer number of the air cannon tank is located on the
air cannon tank's nameplate. This number must be specified for
spare parts orders and/or any correspondence with Martin
Engineering or a contracted dealer.
Fig. 4: As an example
Made by
PS
BWB
358 608
bar
41358-10010-DCP
Tmax
MANUF. NO.
°C
V
Tmin
l
°C
160227
2008
0036
K-SK 4535
Pn 15 bar