© Martin Engineering GmbH 3 M3727UK-09/15
Introduction
2 Introduction
2.1 About these installation instructions
Non-compliance with the present installation instructions can result
in loss of compensation for damage and/or warranty claims.
2.1.1 Scope
These installation instructions apply solely for the product described
herein and are intended for those persons who install this product,
commission it, and monitor its usage.
2.1.2 Copyright
The products described and these installation instructions are
protected by copyright. Any reproduction without a license will be
prosecuted. All rights to the present document are reserved,
including the reproduction and/or copying in any conceivable
manner. Reprints of this document require the written consent of
Martin Engineering.
The technical standard at the time of delivery of the product and its
technical documentation is decisive for as long as no other
information is provided. The product and documentation are subject
to technical changes without prior notification. Earlier documents
then lose their validity. Martin Engineering's General Terms of Sales
and Delivery shall apply.
2.1.3 Exclusion of liability
Martin Engineering guarantees the flawless function of its product in
accordance with its advertising, the published product information
and its technical documentation. Martin Engineering shall assume
no liability for the efficiency and flawless function if the product is
used for a purpose other that that described in the “Intended Use”
section or for damage resulting from the use of accessories and/or
spare parts not supplied and/or certified by Martin Engineering.
To Next Page
Loading...