EasyManua.ls Logo

Martin Tornado - Installing the Safety Cable

Martin Tornado
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© Martin Engineering GmbH 25 M3727UK-09/15
Installation
5.2.6 Installing the safety cable
1. Use a 6 mm fillet weld to connect the enclosed ring nut
(Item A in Fig. 6) to a solid and sufficiently sturdy structure (B)
above the air cannon.
DANGER! FALLING LOADS!
The air cannon can fall off and cause serious or fatal injuries.
Secure the air cannon with a sufficiently strong and long wire rope.
NOTE
The wire rope is included in the air cannon's scope of supply.
NOTE
The safety cable must never be installed under tension.
The safety cable is used solely for securing the air cannon against
crashing.
NOTE
Use suitable fastening material for bulk containers having
properties other than those of steel.

Table of Contents

Related product manuals