© Martin Engineering GmbH 5 M3727UK-09/15
Introduction
2.1.4 Reference to additional documents
Reference is made in these installation instructions to the following
documents:
•MARTIN
®
air cannons, nozzles and flange brackets -
Installation instructions - M3773
•MARTIN
®
Air Cannon Controller - M3592
•MARTIN
®
air surge arrestor for MARTIN
®
TORNADO air
cannons - M3797
•MARTIN
®
thermal hood - M3964
•MARTIN
®
BlastGuard automatic safety slide - M3903
The following standards and directives were complied with in the
preparation of these installation instructions:
• EU Machinery Directive 2006/42/EC
• EC - Directive, Simple unfired pressure vessels 2009/105/EG
• EU Pressure Vessel Directive (97/23/EC)
• ISO/IEC Guide 37 “Installation instructions for products
used by final consumers”, 1995 Edition
• DIN 1421 “Organisation and numbering in texts”, Edition
1983-01
• DIN/EN 12100 “Machine safety - basic definitions, general
design guidelines”, Edition 2013-08
• DIN/ISO 16016 “Technical product documentation -
Protection notices for restricting the use of documents and
products”, Edition 2007-12
• DIN EN 953 “Machine Safety- Safeguards - General
requirements on the design and construction of stationary
and mobile safeguards”.
• DIN EN 4414:2011-04 “Fluid technology - General rules
and safety-related requirements for pneumatic systems
and their component parts.”
• DIN/EN 60204-1 “Safety of machines - Electrical
Equipment of Machines, Part1 General requirements”,
Edition 1998-11
• DIN EN 82079-1 - Creation of user manuals - Structuring,
content and presentation, Part 1 General principles and
detailed requirements.
To Next Page
Loading...