© Martin Engineering GmbH 46 M3727UK-09/15
Troubleshooting
7 Troubleshooting
7.1 Safety information
7.2 Troubleshooting
Check the condition of all of the solenoid valves before performing
other repair work. Damaged solenoid valves which can no longer be
moved or are stuck in one position cause symptoms which can
correspond to the conditions listed below. Check the electrical
connections to all of the solenoid valves.
The possible causes and remedies for problems which may occur
are described in the following tables. Please contact Martin
Engineering immediately if the suggested remedies do not solve the
problem.:
NOTE
The air cannon can be used in many different processes.
Malfunctions other than those listed in Section 7.2 can therefore
occur.
In this case, either Martin Engineering or one of its representatives
can assist with the positioning or with special solutions.
To Next Page
Loading...