© Martin Engineering GmbH 45 M3727UK-09/15
Maintenance
4. Reconnect the filling hose and control cable to the valve cap;
make certain that they are firmly attached and do not leak:
5. Set the safety slide (if provided) to the “open” position:
6. Slowly apply pressure to the air cannon; please note whether
seals deform and/or leaks develop.
7. Wait until the air cannon is full and then fire it.
8. The air cannon is again ready for operation when the firing
process functions flawlessly.
Fig. 18
Fig. 19
To Next Page
Loading...