MARV User Manual
6
AC Adapter
• Connect only to a power outlet of the rated voltage and power supply frequency
(50/60 Hz depending on your region).
• Do not connect other electrical equipment to the same power outlet to which printer is
connected. Also, when using an extension cord, make sure that the extension cord is
rated for the current requirements of the printer.
• Never disassemble or modify the AC adapter, as it is dangerous.
• The power cord may become damaged if it is often stepped on or if heavy objects are
placed on it. Continued use of a damaged power cord and AC adapter can lead to an
accident, such as a re or electrical shock.
• Do not use the power cord while it is coiled.
• Do not pull directly on the power cord. When disconnecting the power cord, grasp the
plug and remove it from the outlet.
• Keep the area around the power cord clear of objects so that the power cord can be
disconnected easily in an emergency.
• Do not use an AC adapter other than the one provided with the printer.
Do not use the AC adapter provided with the printer with other products.
• If you have any questions regarding the power supply, contact your local authorized or
service representative for further information.
To Next Page
Loading...