51
cod. G19503950
SPARE PARTS
3
Spare parts
Orders must be transmitted through our area dealers and should always include the following indi-
cations:
Type, model and serial number of the machine. These data are punched on the data plate with
which every implement is equipped.
Code number of the required spare part. This will be found in the spare parts catalogue.
Description of the part and required quantity.
Means of dispatch. If this item is not indicated, the Manufacturer, while dedicating particular
care to this service, shall not be held responsible for delays in delivery caused by cases of force
majeure.
Transport expenses shall always be at the consignee’s charge. The goods travel at the purchaser’s
risk and peril even when sold ex destination.
NOTE: The terms Right or Left indicated in the descriptions refer to the implement when viewed from
the rear side.
7DEOHLQGH[
Frame Tav. 10 ......pag. 52
Mechanical lifting system Tav. 20 ......pag. 54
Transmission Tav. 30 ......pag. 56
Hinge Tav. 40 ......pag. 58
Cutting blade (tooth riveted) Tav. 50 ......pag. 60
Cutting blade(removable tooth) Tav. 60 ......pag. 62
Wear-proof skids Tav. 70 ......pag. 64
Hydraulic lifting system Tav. 80 ......pag. 66
To Next Page
Loading...
