Need help?Do you have a question about the Maschio FIORE and is the answer not in the manual?
Explains the agricultural implement and its cutting system.
Illustrates the components of the sickle bar mower with numbered parts.
Provides instructions on safely lifting and moving the sickle bar mower.
Explains the meaning of safety symbols and hazard warnings used in the manual.
Refers to the identification label on the machine for serial and model numbers.
Lists specific safety instructions and precautions for operating the machine.
Visually shows the location and meaning of various safety labels on the mower.
Details the correct procedure for parking the tractor and mower safely.
Warns about the dangers of rotating drivelines and how to avoid them.
Guides on how to properly attach the sickle bar mower to the tractor.
Explains how to correctly connect and adapt the PTO shaft for safe operation.
Discusses tractor-mower stability and ballast requirements for road transport.
Repeats parking instructions, emphasizing safety before leaving the operator's seat.
Reinforces the need to stay clear of rotating parts during operation and maintenance.
Provides step-by-step instructions for safely detaching the sickle bar mower from the tractor.
Outlines general safety norms and precautions for operating the mower.
Details the procedure and safety measures for hitching the mower to the tractor.
Recommends suitable clothing and personal protective equipment for safe operation.
Repeats warning about rotating drivelines and engine shutdown.
Explains how to use the mechanical lifting system to adapt the mower to different tractors.
Guides on setting up the mower for optimal cutting performance and reduced wear.
Provides advice for successful mowing, including PTO speed and work speed recommendations.
Introduces the hydraulic lifting kit and the process for its installation.
Explains how to adapt the mower for optimal use with different tractor types.
Details how to adjust the mower for optimal cutting height and inclination.
Describes how to operate the hydraulic lifting device for mowing and transport.
Instructs on safely raising the cutter bar for road transport, including guard placement.
Explains how to perform mowing operations on level ground with depressions.
Details how to adjust and operate the mower for mowing on sloping ground.
Explains the use and installation of the Quick Coupler for hydraulic lifting systems.
Provides steps to disconnect the mower when using a Quick Coupler.
Offers guidance on selecting the appropriate sickle bar type based on ground and forage conditions.
Covers essential safety practices for performing maintenance on the machine.
Advises on wearing suitable clothing and protective gear during servicing.
Emphasizes safety precautions related to the rotating PTO shaft during maintenance.
Explains the purpose and positioning of the hazard bar for operator safety.
Details the lubrication points and frequency for maintaining the mower.
Outlines regular maintenance tasks, including greasing and checks at different hour intervals.
Describes optional wear-proof skids for protecting the cutterbar in abrasive terrain.
Specifies maintenance tasks to be performed every six months, including greasing.
Details cleaning and oiling procedures for the mowing bar blades after each use.
Provides detailed instructions and safety warnings for cleaning and oiling the sickle bar.
Offers guidance on proper storage procedures for the mower during off-season or long periods of inactivity.
Explains how to check and adjust the clearance tolerance for optimal cutting quality and part longevity.
Covers additional maintenance tasks and important precautions before servicing.
Provides instructions for safely replacing cutting blades and related components.
Details how to replace the section-holding bar on riveted systems.
Explains the procedure for replacing individual sections on riveted cutter bars.
Guides on replacing the bar that holds removable teeth.
Outlines the steps for replacing individual removable teeth.
Describes the process for dismantling and assembling anti-vibration yokes.
Provides instructions for replacing worn drive belts and adjusting tension.
Explains how to replace drive and driven pulleys on the mower.
Gives essential guidelines for safely transporting the mower on public roads according to highway codes.
Provides instructions for the safe and environmentally compliant demolition and disposal of the machine.
Introduces the assembly chapter, emphasizing safety and personal protection during handling.
Lists the dimensions and weight specifications for different mower models.
Illustrates and labels the main components of the sickle bar mower assembly.
Shows the components involved in the mechanical lifting system assembly.
Displays the parts for assembling the hydraulic lifting system.
Explains how to order spare parts, including necessary information like type, model, and code.
Provides a reference index to locate specific parts diagrams and their corresponding page numbers.
Lists and illustrates the spare parts for the frame assembly, with part numbers and descriptions.
Details the spare parts for the mechanical lifting system, including codes and descriptions.
Lists spare parts related to the transmission system, such as pulleys and belts.
Provides a list of spare parts for the hinge mechanism of the mower.
Lists spare parts specifically for the cutting blade assembly with riveted teeth.
Lists spare parts for the cutting blade assembly with removable teeth.
Details the spare parts for wear-proof skids used on the cutterbar.
Lists spare parts for the hydraulic lifting system, including cylinders and hoses.
Outlines the general warranty terms, duration, and conditions for the product.
Specifies the warranty terms for replacement parts, including duration and limitations.
General| Brand | Maschio |
|---|---|
| Model | FIORE |
| Category | Lawn Mower |
| Language | English |
To Next Page
