EasyManua.ls Logo

Maserati MC20 2023 - Page 113

Maserati MC20 2023
292 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
111
Instruments and Controls
Left Side Contents Menu and Interaction
(valid only for WET, GT and SPORT drive
mode)
The left side transition is performed with
the left MENU button pressed briefly
according to the following order (in all
drive modes but CORSA).
Trip (default content): a long press of
MENU button reset Trip.
Compass information: a long press
of MENU button open/close the
navigation map according to the status.
An instruction text, e.g. “Hold for full
map”, “Hold to close map” describes
the action you are performing. It
is still possible to open/close the
map, regardless of the fact that the
instruction text has timed out or not.
Empty: with a briefly press of MENU
button you go back to display Trip
content.
During Park Assist visualization the
MENU button performs no action.
In CORSA drive mode the only available
content on left side is the Chronometer
(see “Instrument Cluster Contents” in
this section).
Right Side Contents Menu and
Interaction
The right side transition is performed
with a right VIEW button pressed briefly
according to the following order:
Pedals (default content);
Gauges;
G-Meter (SPORT and CORSA drive
mode only);
Temperatures;
TPMS;
Empty.
Customizable Areas
At key-on, the instrument cluster
displays the last content configuration
present at the previous key-off.
The content of the areas highlighted
in picture can be customized by
selecting them with the buttons on
the multifunction levers among those
following:
Time;
Date;
External Temperature;
Compass;
Blank.
NOTE:
It is not possible to select the same
content for two areas at the same time.
Example: if the user selects the same
content for 7b as it is present in area
7a, then the content shall be set in
7b and removed from 7a (7a set to
“empty”).
These areas are disabled in CORSA and
CORSA + ESC OFF modes.
If speed unit is changed on the MIA
screen, a secondary speedometer with
the previously unit of measure overlaps
the left reconfigurable area 7a on top
left of the instrument cluster.
Default Contents
7a: Time
7b: Compass (if equipped) or external
temperature.

Table of Contents

Related product manuals