Maserati MC20 2023 - Functions of Settings Menu on MIA

4
138
Instruments and Controls
Functions of Settings Menu
on MIA
The MIA system uses a combination of
keys able to access and change the
customer programmable functions
present in the "Controls" or "Settings"
menu of the "Vehicle" screen page.
A shortcut to set the customer
programmable functions is available in
the "Apps" screen page.
Once you enter the “Settings” screen,
using the touch soft-keys to scroll
and change settings of the customer
programmable functions.
NOTE:
• All settings must be edited with
ignition device set to ON position.
• Some of the customer programmable
functions are optional or for a specific
model/version and may not be
available on your vehicle.
• Only one touch screen area/soft-key
may be selected at a time.
Modes for Setting a Function
To enter the desired function, touch the
corresponding soft-key on the lateral list
(the picture shown is “Display”).
To scroll through the functions of the list,
move the cursor up or down, or touch
the arrow or until the function to
be set is displayed. Touching the or
soft keys and the cursor on the right
side of the screen will allow you to scroll
up or down through the available setting
options. In this screen one or more
boxes may indicate status or possible
variants of the function. A check mark in
a box indicates the active status of the
function.
When in a setting line with many options:
• touching on the option currently not
selected (no check mark in option)
move the selector and change the
option accordingly;
• touching on the option already selected
(with selection) do not perform action
(maintain the option selection).
When in a setting line with one option
only:
• if on/off setting (example:
"Touchscreen Beep") touching on the
option select/deselected the option
(check mark appear/disappear). The
same behavior is performed touching
on the entire row area;
• if one-of-many option setting
(example:"English" under "Language"
function) touching on the option do not
perform action (maintain the check
mark). Also in this case, the same
behavior is performed touching on the
entire row area.
When in a function with +/- soft-key:
• if touch on the +/- soft-key, increase or
decrease the value. Touching outside
the +/- soft-key do not perform action;
• when the maximum value +/- is
reached, +/- the soft-key turn gray.
Once the procedure is completed
touch the back arrow to return to
the previous menu or touch the upper
right “X” soft-key, to close the settings
screen.
In this mode the MIA system
allows you to access the following
programmable functions: Display, Safety
& Driving Assistant, Clock & Date,
Phone/Bluetooth, Voice, Navigation,
Camera, Mirrors & Wipers, Lights, Doors
& Locks, Seats & Comfort, Key Off
Options, Audio, Notifications, SiriusXM