5
196
Starting and Driving
Surround View Camera
System ( )
System components
The system uses four cameras to
monitor the area around the vehicle,
placed on the front grid, under the side
rear-view mirrors and on the boot lid,
between the number plate lights.
When the transmission is shifted to R
(Reverse) mode, the top view and rear
view of the surrounding scenario will be
automatically displayed on MIA display.
Image will be displayed with active
guidelines, if activated in the setting list,
as long as vehicle remains in R (Reverse)
mode.
When vehicle is shifted into a different
gear, if the Surround View Camera
Delay is activated on the MIA screen,
the image will remain displayed for
about 10 seconds unless the vehicle
speed exceeds 8 mph(13 km/h). If
the transmission is shifted in P (Park)
mode, the surround view screen will be
immediately canceled and the radio will
return to the last-viewed screen.
Instead, when the transmission is set in
P (Park), N (Neutral) or D (Drive) mode
it is possible to activate the system by
touching the “Surround View Camera”
soft-key in "Controls" menu of the
"Vehicle" or in the App page, if the
vehicle speed is below 8 mph(13 km/h);
otherwise the soft-key becomes grayed.
If manually activated in these ways, the
camera view will expire after 10 seconds
since the vehicle speed exceeds 8
mph(13 km/h).
Once the "Surround View Camera"
screen is displayed, it is possible
to choose which images to display
according to 4 possible settings.
Rear view and top view
Rear cross path view and top
view
Front cross path view and top
view
Front view and top view
In any gear shift mode, when "Surround
View Camera" screen is displayed, a
pop-up message will appear in the upper
To Next Page
Loading...
