5
192
Starting and Driving
As the vehicle moves closer to the object
the instrument cluster will display the
arc moving towards the vehicle and the
sound tone will change from single to
slow, to fast and to continuous.
The vehicle is close to the obstacle when
the instrument cluster displays one
flashing red arc only, combined with a
continuous sound.
NOTE:
Park Assist will turn off the front
park assist audible alert (chime) after
approximately 10 seconds when an
obstacle has been detected, the vehicle
is stationary, and brake pedal is applied.
Enabling and Disabling Park
Assist
By accessing the submenu "Safety &
Driving Assistant" from MIA system,
the front park sensor can be disabled
(option "Off"). The available options
regarding the warning alerts are: "Sound"
or "Sound + Display". Refer to "Functions
of Settings Menu on MIA" in section
"Instruments and Controls" for further
information.
The front sensors can be enabled or
disabled temporarily at any time by
pressing the button on the front dome
console.
After pressing the button the instrument
cluster will display the state of front
parking sensors for approximately five
seconds. The button LED will be on
when the front sensors are disabled. The
button LED will be off when the front
sensors are enabled.
When the the transmission is into R
(Reverse) or D (Drive) mode and the
system is disabled, the instrument
cluster will display the "PARK ASSIST
OFF" image until the transmission
remains in R (Reverse) mode or when the
transmission is moved in D (Drive) mode.
Service the Park Assist System
In case of malfunction of the Park Assist
system, the instrument cluster will
actuate a single sound, once per ignition
cycle. The instrument cluster will display
a message when any of the rear or front
sensor(s) are blocked by snow, mud, or
To Next Page
Loading...
